DIsassembly of PM2 - pitfalls? |

grids7
EDC GANGSTA

Life is good.

Posts: 163

DIsassembly of PM2 - pitfalls? Jul 2, 2013 2:56:11 GMT -8

Quote

Post by grids7 on Jul 2, 2013 2:56:11 GMT -8

Thinking about taking apart the PM2 I just bought off another forum. Watched a couple youtube videos on such, but I'm wondering if any of y'all have done this. Seems the biggest potential problem, in complete disassembly, is pressing the lanyard tube back in place. I probably won't do this, but just in case I loose my mind in the heat of battle, how easy/hard is it to get it back in place?

Deleted

Posts: 0

DIsassembly of PM2 - pitfalls? Jul 2, 2013 13:08:57 GMT -8

Quote

Post by Deleted on Jul 2, 2013 13:08:57 GMT -8

I've done it. Its not hard at all. At least mine wasn't. It came out of one side and I just pressed it back in When I put it back together.
I am by no means some knife expert. I think the Para2 was the first knife I had ever taken apart and it worked out.

Whats wrong with yours? Just cleaning it? Good luck :)

grids7 EDC GANGSTA Life is good. Posts: 163	DIsassembly of PM2 - pitfalls? Jul 2, 2013 13:34:33 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by grids7 on Jul 2, 2013 13:34:33 GMT -8 Thanks for the note. Just cleaning and a childlike sense of "Wonder what it'd be like to take apart?" :hmm:

Deleted Posts: 0	DIsassembly of PM2 - pitfalls? Jul 2, 2013 13:43:20 GMT -8 grids7 likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on Jul 2, 2013 13:43:20 GMT -8 Hahaha me too. Just remember to open the blade to release the tension from the lock before unscrewing the whole thing.
	Last Edit: Jul 2, 2013 13:44:35 GMT -8 by Deleted

Deleted Posts: 0	DIsassembly of PM2 - pitfalls? Jul 3, 2013 4:18:01 GMT -8 grids7 likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on Jul 3, 2013 4:18:01 GMT -8 Mine had a very sticky action (you could HEAR it squeak) when opening. Took apart, wiped down, re-assembled in about ten minutes. Opens like butter now, and zero hassle.

BEER O' CLOCK

Info Center

DIsassembly of PM2 - pitfalls?

Post by grids7 on Jul 2, 2013 2:56:11 GMT -8

Post by Deleted on Jul 2, 2013 13:08:57 GMT -8

Post by grids7 on Jul 2, 2013 13:34:33 GMT -8

Post by Deleted on Jul 2, 2013 13:43:20 GMT -8

Post by Deleted on Jul 3, 2013 4:18:01 GMT -8